研究室TOP > 研究業績

※ 学位論文リストは,博士論文題目一覧修士論文題目一覧卒業論文題目一覧より,それぞれ御覧下さい。

主要論文リスト

  1. Yamamoto Takeki, Yamada Takahiro, Matsui Kazumi: Simultaneously iterative procedure based on block Newton method for elastoplastic problems, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 122巻, 9号, pp.2145-2178, 2021.5.15.
  2. 星屋美優, 斉木功, 山本剛大: 断面変形を考慮した梁要素と連続体要素の接続に関する検討, 土木学会論文集A2(応用力学), 76巻, 2号, pp.I_183-I_191, 2021.2.1.
  3. Putra Gerry, Kitamura Mitsuru: Study on optimal design of hatch cover via a three-stage optimization method involving material selection, size, and plate layout arrangement, OCEAN ENGINEERING, 219巻, 2021.1.1. https://doi.org/10.1016/j.oceaneng.2020.108284
  4. Date Shugo, Abe Yoshiaki, Yamamoto Takeki, Okabe Tomonaga: Fluid-structural design analysis for composite aircraft wings with various fiber properties, JOUNAL OF FLUID SCIENCE AND TECHNOLOGY, 16巻, 1号, JFST0009, 2021.1.1.
  5. Takezawa Akihiro, Albert C, Chen Qian, Liang Xuan, Dugast Florian, Zhang Xiaopeng, Kitamura Mitsuru: Sensitivity analysis and lattice density optimization for sequential inherent strain method used in additive manufacturing process, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 370巻, 2020.10.1. https://doi.org/10.1016/j.cma.2020.113231
  6. Woo Donghan, Kitamura Mitsuru, Takezawa Akihiro: Method to systemically order welding sequence to efficiently mitigate welding displacement of a general ship grillage structure, SHIPS AND OFFSHORE STRUCTURES, 15巻, 7号, pp.753-768, 2020.8.8. https://doi.org/10.1080/17445302.2019.1681865
  7. Woo Donghan, Kitamura Mitsuru: Numerical Prediction of Welding Distortion Considering Gravity Force on General Ship Grillage Structure by Elastic Finite Element Method Using Inherent Strain, JOURNAL OF MARINE SCIENCE AND ENGINEERING, 8巻, 6号, 2020.6.20. https://doi.org/10.3390/jmse8060454
  8. Yamamoto Takeki, Yamada Takahiro: A quadrilateral shell element incorporating thickness-stretch for nearly incompressible hyperelasticity, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 121巻, 9号, pp.2001-2032, 2020.5.15.
  9. Woo Donghan, Kitamura Mitsuru, Takezawa Akihiro: Systematic method for positioning clamps and strongbacks based on their influence on welding displacements, OCEAN ENGINEERING, 202巻, 2020.4.15. https://doi.org/10.1016/j.oceaneng.2020.107084
  10. Guo Honghu, Takezawa Aikihiro, Honda Masanori, Kawamura Chikara, Kitamura Mitsuru: Finite element simulation of the compressive response of additively manufactured lattice structures with large diameters, COMPUTATIONAL MATERIALS SCIENCE, 175巻, 2020.4.1. https://doi.org/10.1016/j.commatsci.2020.109610
  11. 斉木功, 鄭勲, 山本剛大: 断面変形を梁のせん断変形と独立に考慮した梁理論, 土木学会論文集A2(応用力学), 75巻, 2号, pp.I_3-I_12, 2020.2.6.
  12. Donghan Woo, Nianzhong Chen, Mitsuru Kitamura: ICEBERG COLLISION DAMAGE SIMULATION OF SPARS AND SHIP-SHAPED FLOATING PRODUCTION STORAGE AND OFFLOADING PLATFORMS IN THE ARCTIC REGION, The Journal of Ocean Technology, 14巻, 4号, pp.75-91, 2019.12.18.
  13. Takezawa Akihiro, Zhang Xiaopeng, Kitamura Mitsuru: Optimization of an additively manufactured functionally graded lattice structure with liquid cooling considering structural performances, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 143巻, 2019.11.1. https://doi.org/10.1016/j.ijheatmasstransfer.2019.118564
  14. 田淵航, 山本剛大, 斉木功: 面内曲げを受ける腹板の水平補強材の配置と長さに関する数値的検討, 鋼構造年次論文報告集, 27巻, pp.238-247, 2019.11.1.
  15. Yamamoto Takeki, Yamada Takahiro: Elastic buckling of cylindrical shell under pressure load evaluated on surface, MECHANICAL ENGINEERING JOURNAL, 6巻, 4号, 19-00113, 2019.8.15.
  16. Takezawa Akihiro, Zhang Xiaopeng, Kato Masaki, Kitamura Mitsuru: Method to optimize an additively-manufactured functionally-graded lattice structure for effective liquid cooling, ADDITIVE MANUFACTURING, 28巻, pp.285-298, 2019.8.1. https://doi.org/10.1016/j.addma.2019.04.004
  17. Putra Gerry, Kitamura Mitsuru, Takezawa Akihiro: Structural optimization of stiffener layout for stiffened plate using hybrid GA, INTERNATIONAL JOURNAL OF NAVAL ARCHITECTURE AND OCEAN ENGINEERING, 11巻, 2号, pp.809-818, 2019.7.1. https://doi.org/10.1016/j.ijnaoe.2019.03.005
  18. Takezawa Akihiro, Yamamoto Takashi, Zhang Xiaopeng, Yamakawa Keisuke, Nakano Shinichi, Kitamura Mitsuru: An objective function for the topology optimization of sound-absorbing materials, JOURNAL OF SOUND AND VIBRATION, 443巻, pp.804-819, 2019.3.17. https://doi.org/10.1016/j.jsv.2018.11.051
  19. 竹田翼, 斉木功, 山本剛大, 岩坪要: 非合成連続多主桁橋の冗長性評価に及ぼすスラブアンカーの合成効果の影響, 土木学会論文集A2(応用力学), 74巻, 2号, pp.I_579-I_590, 2019.1.31.
  20. 山本剛大, 山田貴博, 松井和己, 斉木功: 鋼構造物を対象とした弾塑性解析への異種要素を接続したモデル化手法の適用, 土木学会論文集A2(応用力学), 74巻, 2号, pp.I_147-I_158, 2019.1.31.
  21. 斉木功, 藤本竜太, 山本剛大: 非均質断面梁のせん断剛性評価に用いる断面の回転に関する一考察, 土木学会論文集A2(応用力学), 74巻, 2号, pp.I_3-I_11, 2019.1.31.
  22. Yamamoto Takeki, Yamada Takahiro, Matsui Kazumi: Numerical procedure to couple shell to solid elements by using Nitsche's method, COMPUTATIONAL MECHANICS, 63巻, pp.69-98, 2019.1.15.
  23. Liu Zhijun, Cho Shingo, Takezawa Akihiro, Zhang Xiaopeng, Kitamura Mitsuru: Two-stage layout-size optimization method for prow stiffeners, INTERNATIONAL JOURNAL OF NAVAL ARCHITECTURE AND OCEAN ENGINEERING, 11巻, 1号, pp.44-51, 2019.1.1. https://doi.org/10.1016/j.ijnaoe.2018.01.001
  24. 藤本真明, 斉木功, 山本剛大: 鋼トラス橋の動的効果を考慮した静的非線形リダンダンシー解析, 鋼構造年次論文報告集, 26巻, pp.312-319, 2018.11.1.
  25. 斉木功, 西井大樹, 山本剛大: 任意断面のせん断遅れを考慮できる梁要素, 日本計算工学会論文集, 2018巻, p.20180013, 2018.9.27.
  26. Akihiro Takezawa, Kazuo Yonekura, Yuichiro Koizumi, Xiaopeng Zhang, Mitsuru Kitamura: Isotropic Ti-6Al-4V lattice via topology optimization and electron-beam melting, ADDITIVE MANUFACTURING, 22巻, pp.634-642, 2018.8.1. https://doi.org/10.1016/j.addma.2018.06.008
  27. Akihiro Takezawa, Jaewook Lee, Mitsuru Kitamura: Design methodology of magnetic fields and structures for magneto-mechanical resonator based on topology optimization, OPTIMIZATION AND ENGINEERING, 19巻, 1号, pp.19-38, 2018.3.1. https://doi.org/10.1007/s11081-017-9356-3
  28. 山本剛大, 山田貴博, 松井和己: Nitsche法を用いたシェル要素とソリッド要素の接合, 73巻, 2号, pp.I_177-I_187, 2018.1.31.
  29. 斉木功, 新井晃朋, 山本剛大, 岩熊哲夫: 非均質断面梁のせん断剛性評価に関する一考察, 土木学会論文集A2(応用力学), 73巻, 2号, pp.I_23-I_31, 2018.1.31.
  30. 西津卓史, 谷次智弥, 竹澤晃弘, 米倉一男, 渡邊修, 北村充: トポロジー最適化と積層造形を活用したラティス構造の創出手法, 日本機械学会論文集, 83巻, 855号, 2017.12.15.
  31. Yamamoto Takeki, Yamada Takahiro, Matsui Kazumi: A quadrilateral shell element with degree of freedom to represent thickness‒stretch, COMPUTATIONAL MECHANICS, 59巻, pp.625-646, 2017.4.1.
  32. T Nishizu, A Takezawa, M Kitamura: Eigenfrequecy-based damage identification method for non-destructive testing based on topology optimization, ENGINEERING OPTIMIZATION, 49巻, 3号, pp.417-433, 2017.3.1. https://doi.org/10.1080/0305215X.2016.1190350
  33. Akihiro Takezawa, Makoto Kobashi, Yuichiro Koizumi, Mitsuru Kitamura: Porous metal produced by selective laser melting with effective isotropic thermal conductivity close to the Hashin-Shtrikman bound, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 105巻, pp.564-572, 2017.2.1. https://doi.org/10.1016/j.ijheatmasstransfer.2016.10.006
  34. Akihiro Takezawa, Masafumi Daifuku, Youhei Nakano, Kohya Nakagawa, Takashi Yamamoto, Mitsuru Kitamura: Topology optimization of damping material for reducing resonance response based on complex dynamic compliance, JOURNAL OF SOUND AND VIBRATION, 365巻, pp.230-243, 2016.3.17. https://doi.org/10.1016/j.jsv.2015.11.045

国際会議発表リスト

  1. Akihiro Takezawa and Mitsuru Kitamura: Integration of shape and topology optimizations based on phase field method, The 6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Kyoto Japan, 2010.
  2. Satoru Nii, Akihiro Takezawa and Mitsuru Kitamura: Robust topology optimization for the worst load case, The 6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Kyoto Japan, 2010.
  3. Masahiro Kobayashi, Akihiro Takezawa, Mitsuru Kitamura and Emilio C. N. Silva: Topology optimization for load cells including location of strain gauges, The 6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Kyoto Japan, 2010.
  4. Mitsuru Kitamura and Takakazu Nakamori: Optimal Design of Mid-ship Section Cooperating with General Arrangements for Bulk Carrier, The 6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Kyoto Japan, 2010.
  5. Akihiro Takezawa, Satoru Nii, Mitsuru Kitamura and Nozomu Kogiso: Robust topology optimization for the worst load case based on aggregation of linear system, The 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, 2010.
  6. Mitsuru Kitamura, Kunihiro Hamada, Akihiro Takezawa and Tetsuya Uedera: Shape Optimization of Double Bottom Structure in Cooperation with Individual Mesh Sub-division and Multi-point Constraint, The 19-th International Offshore and Polar Engineering Conference, Osaka Japan, 2009.
  7. Mitsuru Kitamura, Tetsuya Uedera, Kunihiro Hamada and Akihiro Takezawa: Shape Optimization of Ship Double Bottom Structure with Aid of Idealized Composition of Ship, The 10th US National Congress on Computational Mechanics, Columbus U.S.A., 2009.
  8. Akihiro Takezawa, Mitsuru Kitamura and Shinji Nishiwaki: Structural optimization of compliant mechanisms using the phase field method, The 10th US National Congress on Computational Mechanics, Columbus U.S.A., 2009.
  9. Akihiro Takezawa, Shinji Nishiwaki and Mitsuru Kitamura: Structural shape and topology optimization based on phase-field method, The 8-th World Congress on Structural and Multidisiplinary Optimization, NTUST Tiwan, 2009.
  10. Akihiro Takezawa, Yuri Kaneno, Mitsuru Kitamura and Kunihiro Hamada: A Design Optimization Method for Bridge Wing of Bulker Improving Anti-vibration Characteristic, The 8th International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT2009), Budapest, Hungary, 2009.
  11. Kunihiro Hamada, Mitsuru Kitamura, Akihiro Takezawa and Y.Takanobu: A Study on Design Support System for Ship Principal Particulars in Consideration of the Accuracies of the Analyses, The 8th International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT2009), Budapest, Hungary, 2009.
  12. Varikkattu Karottu, Kunihiro Hamada and Mitsuru Kitamura: Optimization of Block Division using Nodal Cut Set Method in Consideration of Production Stages in Ship Hull Construction, The 19th International Offshore and Polar Engineering Conference, Osaka Japan, 2009.
  13. Hamada, K., Kitamura, M., Yasui, S., Kawasaki, H., and Hana, Y.: Development of Design Process Simulator for the Ship Initial Design Stage, The International Conference on Computer Applications in Shipbuilding,Shanghai China, 2009.
  14. Kitamura, M., Hamada, K., Takezawa, A., Kanaikari, K.: Multi-step Optimization Method and its Application to the Design of Mid-ship Section of Ship Structure, Proceedings of Advanced Maritime Engineering Conference 2008, pp.305-311, 2008.
  15. Takezawa, A., Nishiwaki, S., Kitamura, M., Silva, E.C.N.: Topology Optimization for Force Sensor Structures Based on Singular Value Decomposition, Proceedings of 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA 2008-5899, CD-ROM, 2008.
  16. Takezawa, A., Nishiwaki, S., Kitamura: Topology Optimization Based on Reaction Diffusion Equation, Proceedings of CJK-OSM5: The 5th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, J022, Web site, 2008.
  17. Kitamura, M., Hamada, K., Takezawa, A., Uedera. T., Suzuki, H., Kanaikari, K., Tanigawa, T.: Multi-step Optimization Method and its Application to the Design of Mid-ship Section of Ship Structure, Proceedings of Third Asian-Pacific Congress on Computational Mechanics in conjunction with Eleventh International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science, CD-ROM, 2007.
  18. Kitamura, M., Hamada, K., Uedera. T., Takezawa, A., Takaki, T., Tomochika, M., Yamamoto, H.: A Study on Size and Thickness Optimizations for the Bottom Structure of Ship, Proceedings of Third Asian-Pacific Congress on Computational Mechanics in conjunction with Eleventh International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science, CD-ROM, 2007.
  19. Takezawa, A., Mogami, M., Nishiwaki, S., Kitamura, M.: Structural Optimization Method Using Discrete Elements for Multi-Band-Gap Structures, Proceedings of Third Asian-Pacific Congress on Computational Mechanics in conjunction with Eleventh International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science, CD-ROM, 2007.
  20. Takezawa, A., Nishiwaki, S., Izui, K., Yoshimura, M., Kogiso, N.: A Conceptual Design Support Methodology Based On Structural Optimization Techniques Using Function-Oriented Elements, Proceedings of ICED’07: International Conference On Engineering Design, 71, CD-ROM, 2007.
  21. Takezawa, A., Nishiwaki, S., Izui, K., Yoshimura, M.: Structural Topology Optimization Using Frame Elements Based on the Complementary Strain Energy Concept for Eigen-frequency Maximization, Proceedings of IDETC/CIE 2005: ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conferences, DETC2005-85176, CD-ROM, 2005.
  22. Takezawa, A., Nishiwaki, S., Izui, K., Yoshimura, M.: Topology Optimization For The Conceptual Design Support, Proceedings of CJK-OSM3: The Third China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, pp.729-734, 2004.
  23. Takezawa, A., Nishiwaki, S., Izui, K., Yoshimura, M.: A Method for Determining the Optimal Direction of the Principal Moment of Inertia in Frame Element Cross-Sections, Proceedings of DETC2004: ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conferences DETC2004-57369, CD-ROM, 2004.
  24. Takezawa, A., Nishiwaki, S., Izui, K., Yoshimura, M.: Structural Topology Optimization Using Function-oriented Elements Based on the Concept of First Order Analysis, Proceedings of DETC2003: ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conferences DETC2003-48773, CD-ROM, 2003.
  25. Takezawa, A., Nishiwaki, S., Izui, K., Yoshimura, M., Nishigaki, H., and Kojima, Y.: Structural optimization for concurrent design and analysis at the conceptual design phase, Proceedings of the 10th ISPE International Conference on Concurrent Engineering: Research and Applications, pp.9-16, 2003.
  26. 竹澤晃弘, 西脇眞二, 泉井一浩, 吉村允孝, 西垣英一, 鶴見康昭: 離散化構造要素を用いたトポロジー最適化, 日本機械学会論文集C編, Vol.70 (692), pp.1008-1015, 2004.

受賞リスト

  • 野村潤平: 広島大学大学院工学研究科学生表彰, 2021.3.
  • 山田崇資: 広島大学エクセレント・スチューデント・スカラシップ, 2021.1.
  • 野村潤平: 広島大学工学部学生表彰, 2019.3.
  • 権出憲一: 広島大学工学部学生表彰, 2018.3.
  • 竹澤晃弘: モード減衰比の向上を目的としたマルチマテリアルトロポジー最適化, 日本機械学会2016年度機械力学・計測制御部門一般表彰(オーディエンス表彰), 2017.8.
  • 竹澤晃弘: 動的問題に対する構造最適化法とその応用に関する研究, 平成29年度科学技術分野の文部科学大臣表彰 若手科学者賞, 2017.4.
  • 張信吾: 日本船舶海洋工学会奨学褒章, 2017.3.
  • 竹澤晃弘: Planer negative thermal expansion composite by multi-material topology optimization and 3D printing, Asian Conference on Design & Digital Engineering (ACDDE) 2015 Best Presentation Award, 2015.11.
  • 竹澤晃弘: 日本機械学会設計工学・システム部門フロンティア業績表彰, 2015.9.
  • 野波諒太: 補強材の本数及び位置を最適化するための計算手法に関する研究, 日本機械学会設計工学・システム部門優秀講演表彰, 2014.9.
  • 竹澤晃弘: The JACM Young Investigator Award(日本計算力学奨励賞), 2015.7.
  • 西津卓史: トポロジー最適化と固有振動数解析に基づく非破壊検査での損傷同定手法, 日本船舶海洋工学会奨励賞(乾賞), 2014.5.
  • 西津卓史: 構造過渡応答解析とトポロジー最適化に基づく船殻非破壊検査法の構築, 日本科学協会笹川科学研究奨励賞, 2014.4.
  • 西津卓史: 大学院研究奨励賞, 自動車技術会, 2014.3.
  • 竹澤晃弘: 日本機械学会設計工学・システム部門奨励業績表彰, 2013.11.
  • 竹澤晃弘, 北村充: Structural topology optimization considering heat conductivity and strength, ACDDE2013 Best Presentation Award, 2013.9.
  • 西津卓史, 竹澤晃弘, 北村充: Damage detection method based on vibration characteristic in non-destructive inspection, ACDDE2013 Best Presentation Award, 2013.9.
  • 北村充, 土井康明: 平成24年度船舶海洋科学技術啓発広報活動奨励賞, 日本船舶海洋工学会西部支部, 2013.5.
  • 野波涼太, 北村充, 竹澤晃弘, 平川真一: 補強材の配置および本数の変更を伴った船体構造最適化に関する研究, 日本機械学会設計工学・システム部門D&Sコンテスト優秀表彰, 2012.9.