研究室TOP > 研究業績

※ 学位論文リストは,博士論文題目一覧修士論文題目一覧卒業論文題目一覧より,それぞれ御覧下さい。

主要論文リスト

  1. 平田法隆, 浮田寛之, 安川宏紀: 練習船「豊潮丸」の操縦性能に及ぼすトリム影響, 日本航海学会論文集, 第126号, pp.81-89, 2012.
  2. 安川宏紀, 平田法隆, 田中進, 伊藤聡志: バウスラスタを有する2軸2舵船の操縦流体力特性, 日本航海学会論文集, 第125号, pp.209-219, 2011.
  3. 田中進, 平田法隆, 半田晃士, 関広史: 上昇する錨鎖の横振動について, 日本船舶海洋工学会論文集, 第13号, pp.249-256, 2011.
  4. 平田法隆, 松村和昌: K-GPSによるOP級ヨットの運動計測, 日本航海学会論文集, 第124号, pp.273-289, 2011.
  5. 安川宏紀, 平田法隆, 田中進, 秦寛樹: ベックツイン舵を備えた船の低速操縦運動の水槽試験, 日本航海学会論文集, 第124号, pp.265-271, 2011.
  6. 濵田邦裕, 北村充, 高延宣文, 羽奈洋介: 製品情報の不確定性を考慮した船舶主要目設計支援システムに関する研究, 日本船舶海洋工学会論文集, 第13号, pp.239-248, 2011.
  7. 中森隆一,北村充,濵田邦裕: 3Dプロダクトモデルを利用した船体中央横断面の総合的最適化に関する研究 -既存船舶情報に基づいた構造最適設計-, 日本船舶海洋工学会論文集, Vol.11, pp.81-88, 2010.
  8. Li, R., Hamada, K. and Simozori, T.: Development of a theory of constraints based scheduling system for ship piping production, Journal of Shanghai Jiaotong University (Science), Vol.15, No.3, pp.354-362, 2010.
  9. 平田法隆, Krisana PUNAYANGKOOL, 他: 潮汐影響のある河川の水深計測について, 日本航海学会論文集, 第120号, pp.59-64, 2009.
  10. 安川宏紀, 平田法隆, 田中進, 小瀬邦治: 首振り型推進器を有する船の操縦性に関する研究, 日本船舶海洋工学会論文集, 第9号, pp.155-165, 2009.
  11. 竹澤晃弘, 金野有里, 北村充, 濵田邦裕, 大槻康明: トポロジー最適化を用いたブリッジウイングの防振設計に関する研究, 日本船舶海洋工学会論文集, Vol.10, pp.205-212, 2009.
  12. 濵田邦裕, 北村充, 安井聡一, 川崎裕: 船舶初期設計プロセスを対象とした設計プロセスシミュレータの開発, 日本船舶海洋工学会論文集, Vol.9, pp.211-222, 2009.
  13. Varikkattu Karottu K., Hamada, K., Talezawa, A. and Kitamura, M.: Optimization of Block Division Using Nodal Cut Set Method, Ship Technology Research, Vol.56, pp.142-152, 2009.
  14. Hamada, K., Kitamura, M., Talezawa, A. and Kanaikari, K.: A Multi-Step Design Optimization Method for Mid-Ship Sections, Ship Technology Research, Vol.56, pp.110-120, 2009.
  15. Punayangkool, K., Hamada, K. and Kose, K.: An analysis of transportation demand on GMS network in consideration of error factors, 日本航海学会論文集, 第120号, pp.145-155, 2009.
  16. K.K.King, H.Yasukawa, N.Hirata: Hydrodynamic derivatives investigation of unconventionally arranged pusher-barge systems, Journal of Marine Science and Technology, Vol.13, No.3, pp.256-268, 2008.
  17. K.K.King, H.Yasukawa, N.Hirata, 他: Maneuvering simulations of pusher-barge systems, Journal of Marine Science and Technology, Vol.13, No.2, pp.117-126, 2008.
  18. 北村充, 上寺哲也, 濵田邦裕, 竹澤晃弘: 部材認識機能を利用した船体構造の形状最適化システムに関する研究 -船体構造二重底部の形状最適化-, 日本船舶海洋工学会論文集, Vol.8, pp.273-281, 2008.
  19. 濵田邦裕, 北村充, 高延宣文, 西本嗣史, 安井聡一: 解析手法の精度を考慮した船舶主要目設計支援システムに関する研究, 日本船舶海洋工学会論文集, Vol.8, pp.265-272, 2008.
  20. 北村充, 濵田邦裕, 竹澤晃弘, 高木貴弘, 金谷勲平, 大槻康明: 独立要素分割と多点拘束を利用した船体構造二重底部の形状および寸法最適設計に関する研究, 日本船舶海洋工学会論文集, Vol.7, pp.89-96, 2008.
  21. 中森隆一, 北村充, 濵田邦裕: 船首尾部のロンジ配置最適化に関する研究, 日本船舶海洋工学会論文集, Vol.7, pp.81-88, 2008.
  22. 安川宏紀, 平田法隆, 他: 風圧下における被曳船振れまわり運動の水槽試験, 日本船舶海洋工学会論文集, 第6号, pp.323-329, 2007.
  23. 北村充, 濵田邦裕, 鈴木博喜, 矢野佳苗, 徳岡慶輔, 大槻康明: 船体中央断面最適設計の実用化と高速最適化システムの開発に関する研究, 日本船舶海洋工学会論文集, Vol.6, pp.141-149, 2007.
  24. 上寺哲也, 北村充, 濵田邦裕, 水田玲子: ニューラルネットワークを用いた防撓パネルの変位及び応力の予測, 日本船舶海洋工学会論文集, Vol.6, pp.351-359, 2007.
  25. Wibisono, M.A., Hamada, K., Kitamura, M. and Varikkattu Karottu K.: Optimization System of Block Division Using Genetic Algorithm and Product Model, 日本船舶海洋工学会論文集, Vol.6, pp.109-118, 2007.
  26. 山田忠史, 濵田邦裕, 北村充, 飯田誠: 東アジア圏との国際貨物輸送機器分担に関する一考察, 日本船舶海洋工学会論文集, Vol.5, pp.63-69, 2007.
  27. 濵田邦裕, 武市祥司, Wibisono M.Arif, 青山和浩: ジョイント統合設計支援システムの情報構造と情報処理手法の検討, 溶接学会論文集, Vol.25, No.2, pp.298-308, 2007.
  28. 濵田邦裕, 武市祥司, 青山和浩: 要求分析と設計プロセス分析に基づく接合設計支援システムの構築, 溶接学会論文集, Vol.25, No.2, pp.286-297, 2007.

国際会議発表リスト

  1. Nakayama, Y., Yasukawa, H., Hirata, N., Hata, H.: Time Domain Simulation of Wave-Induced Motions of a Towed Ship in Head Seas, ISOPE-2012, Rhodes, Greece, 2012.
  2. Yasukawa, H., Hirata, N., Kose, K., Tamashima, M., Nakatani, T.: Hull Form Development of a Double-Ended Catamaran Ferry with Electric Propulsion System, 11th International Marine Design Conference (IMDC2012), Glasgow, Scotland, Volume 3, pp.325-333, 2012.
  3. Hirata, N., Yasukawa, H., Ukita, H.: Maneuvering Fullscale Trial of a Ship with Azimuth Propellers to Capture the Trim Effect, Marsim'12, Singapore, April 23-27, 2012.
  4. Kitamura, M., Uedera, T., Hamada, K. and Takwezawa, A.: Shape and Size Optimization of the Double Bottom Structure of Bulk Carrier at the Initial Design Stage with Finite Element Analysis, Proceedings of the Twenty-first (2011) International Offshore and Polar Engineering Conference, Maui, Hawaii, USA, June 19-24, pp.839-844, 2011.
  5. Kitamura, M., Nakamori, T., Hamada, K. and Takwezawa, A.: Structural Optimization of the Mid-ship Section of a Bulk Carrier with Aid of a Three-Dimensional Product Model, 6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Kyoto, Japan, CD-ROM, 2010.
  6. Hamada, K., Takanobu, Y. and Varikkattu Karottu K.: Development of Design Support System for ship in Consideration of Uncertainty in Product Information, Proceedings of the 9th International Conference on Computer and IT Applications in the Maritime Industries (COMPIT2010), Gubbio, Italy, pp.90-98, 2010.
  7. S.Tanaka, N.Hirata, H.Yasukawa: Hydrodynamic Forces Investigation on a Ship with Azimuthing Propellers in Maneuvering Motions, MARSIM'09, Panama, 2009.
  8. Li, R., Hamada, K. and Simozori, T.: Development of Scheduling System for Piping Factory by the use of TOC and Production Model, Proceedings of the International Conference on Computer Applications in Shipbuilding 2009, Shanghai, China, Vol.III, pp.231-240, 2009.
  9. Hamada, K., Kitamura, M., Yasui, S., Kawasaki, H. and Hana, Y.: Development of Design Process Simulator for the Ship Initial Design Stage, Proceedings of the International Conference on Computer Applications in Shipbuilding 2009, Shanghai, China, Vol.II, pp.27-37, 2009.
  10. Varikkattu Karottu K., Hamada, K. and Kitamura, M.: Optimization of Block Division using Nodal Cut Set Method in Consideration of Production Stages in Ship Hull Construction, Proceedings of the 19th International Offshore and Polar Engineering Conference, Osaka, Japan, pp.787-794, 2009.
  11. Kitamura, M., Hamada, K. and Takezawa, A.: Shape Optimization of Double Bottom Structure in Cooperation with Individual Mesh Sub-division and Multi-point Constraint, Proceedings of the 19th International Offshore and Polar Engineering Conference, Osaka, Japan, pp.714-719, 2009.
  12. Takezawa, A., Kaneno, Y., Kitamura, M., Hamada, K. and Ohtsuki, Y.: A Design Optimization Method for Bridge Wing of Bulker Improving Anti-Vibration Characteristics, Proceedings of the 8th International Conference on Computer and IT Applications in the Maritime Industries (COMPIT2009), Budapest, Hungary, pp.238-246, 2009.
  13. Hamada, K., Kitamura, M., Takezawa, A. and Takanobu, Y.: A Study on Design Support System for Ship Principal Particulars in Consideration of the Accuracies of the Analyses, Proceedings of the 8th International Conference on Computer and IT Applications in the Maritime Industries (COMPIT2009), Budapest, Hungary, pp.29-37, 2009.
  14. K.K.King, H.Yasukawa, N.Hirata: Turning Simulation of a Pusher-Barge System in Shallow Water, Proceedings of 4th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro 2008), Taipei, Taiwan, pp.93-100, 2008.
  15. Wibisono, M.A., Hamada, K. and Kitamura, M.: Optimization System of Block Construction Using Genetic Algorithm and Joint Hierarchy Chromosome, Proceedings of the 1st Regional Conference in Manufacturing Engineering, Manila, Philippines, CD-ROM, 2008.
  16. Hidayat, Y.A., Takahashi, K., Morikawa, K., Hamada, K., Diawati, L. and Cakravastia, A.: Partner Selection with Dynamic Pricing under Uncertainty Condition in the Global Marketplace, Proceedings of the 9th Asia-Pacific Industrial Engineering and Management Systems, Bali, Indonesia, pp.944-956, 2008.
  17. Kitamura, M., Hamada, K., Takezawa, A., and Kanaikari, K.: Multi-step Optimization Method and its Application to the Design of Mid-ship Section of Ship Structure, Proceedings of the 3rd Pan Asian Association of Maritime Engineering Societies (PAAMES) meeting and The Advance Maritime Engineering Conference (AMEC2008), Chiba, Japan, CD-ROM, 2008.
  18. Hamada, K., Kitamura, M., Okimoto, M., Sorakubo, H., and Punayangkool, K.: Development of Logistics Simulation System by Petri Net, Proceedings of the 22th Asian Technical Exchange and Advisory Meeting on Marine Structure (TEAM2008), Istanbul, Turkey, pp.208-215, 2008.
  19. Hamada, K., Kitamura, M., Takanobu, Y., and Yasui S.: A study on Robust Optimization of Principal Particulars, Proceedings of the 22th Asian Technical Exchange and Advisory Meeting on Marine Structure (TEAM2008), Istanbul, Turkey, pp.401-406, 2008.
  20. Hidayat, Y.A., Takahashi, K., Morikawa, K., Hamada, K., Diawati, L. and Cakravastia, A.: A Quantitative Model of Partner Selection by Considering Demand Uncertainties, Proceedings of the 9th International Conference of Industrial Management, Osaka, Japan, pp.120-129, 2008.
  21. Nakamori, T., Kitamura, M. and Hamada, K.: Optimization of Arrangement of Longitudinal Stiffeners on Shell Plate at Fore and Aft Parts of Ships, Proceedings of the 7th International Conference on Computer and IT Applications in the Maritime Industries (COMPIT2008), Liege, Belgium, pp.329-337, 2008.
  22. H.Yasukawa, N.Nakamura, N.Hirata and K.K.Koh: Maneuvering Simulations of Tow and Towed Ships, International Conference on Towing & Salvage of Disabled Tankers (TSDT'07), Glasgow, Scotland, pp.73-82, 2007.
  23. Kitamura, M., Hamada, K., Uedera, T., Takezawa, A., Takaki, T., Tomochika, M., Yamamoto, H., and Imoto, S.: A Study on Size and Thickness Optimizations for the Bottom Structure of Ship, Proceedings of the 3rd Asian-Pacific Congress on Computational Mechanics (APCOM'07), Kyoto, Japan, CD-ROM, 2007.
  24. Kitamura, M., Hamada, K., Takezawa, A., Uedera, T., Suzuki, H., Kanaikari, K., and Tanigawa, T.: Multi-step Optimization Method and its Application to the Design of Mid-ship Section of Ship Structure, Proceedings of the 3rd Asian-Pacific Congress on Computational Mechanics (APCOM'07), Kyoto, Japan, CD-ROM, 2007.
  25. Punayangkool, K., Hamada, K. and Kose, K.: A study on Transportation Network in Greater Mekong Subregion, Proceedings of the 21th Asian Technical Exchange and Advisory Meeting on Marine Structure (TEAM2007), Yokohama, Japan, pp.357-364, 2007.
  26. Kitamura, M., Hamada, K., Suzuki, Y., and Yano, K.: Development of optimal structure design system for mid-ship section, Proceedings of 2nd International Conference on Computational Methods, CD-ROM, 2007.
  27. Kitamura, M., Hamada, K., Takaki, T. and Kanaya, K.: Shape optimization of ship structure by multiple point constraint and individual mesh sub-division techniques, Proceedings of 2nd International Conference on Computational Methods, CD-ROM, 2007.

受賞リスト

  • 令和6年3月: 広島大学大学院先進理工系科学研究科学生表彰(新谷仰)
  • 令和6年3月: 日本船舶海洋工学会奨学褒章(修士: 新谷仰)
  • 令和5年12月: 広島大学エクセレント・スチューデント・スカラシップ(新谷仰)
  • 令和5年6月: 日本船舶海洋工学会賞(論文賞)・日本造船工業会賞
     (和田祐次郎, 濱田邦裕, 平田法隆: Shipbuilding capacity optimization using shipbuilding demand forecasting model)
  • 令和4年3月: 日本船舶海洋工学会奨学褒章(修士: 山村巽)
  • 令和4年3月: 溶接学会中国支部 山本正登奨学賞(冠野雅人)
  • 令和3年12月: 広島大学エクセレント・スチューデント・スカラシップ(鎌田拓実)
  • 令和3年3月: 広島大学学生表彰 (その他の活動)
     (鎌田拓実: 船舶自動識別装置(AIS)データの分析に関する国際ワークショップ「AIS Big Data Hackathon」学生部門世界1位)
  • 平成29年3月: 溶接学会中国支部 山本正登奨学賞(居原尚輝)
  • 平成25年5月: 日本船舶海洋工学会賞(発明・開発 … 小瀬邦治名誉教授)
  • 平成24年: 日本船舶海洋工学会賞(論文賞)
     (田中進, 平田法隆, 半田晃士, 関広史: 上昇する錨鎖の横振動について)
  • 平成24年: 日本船舶海洋工学会賞(論文賞)・日本造船工業会賞・日本海事協会賞
     (濱田邦裕: 製品情報の不確定性を考慮した船舶主要目設計支援システムに関する研究)
  • 平成20年3月: 溶接技術奨励賞
  • 平成13年5月: 日本造船学会奨励賞(乾賞)
  • 平成12年11月: 広島大学工学部教育顕彰
  • 平成12年4月: 溶接学会シンポジウム賞, 溶接学会論文賞