研究室TOP > 研究業績

※ 学位論文リストは,博士論文題目一覧修士論文題目一覧卒業論文題目一覧より,それぞれ御覧下さい。

主要論文リスト等

  1. Michiya Imachi, Satoyuki Tanaka, Tinh Quoc Bui: Mixed-mode dynamic stress intensity factor evaluation employing ordinary state-based peridynamics theory, Theoretical Applied Fracture Mechanics, 2017, accepted.
  2. Shota Sadamoto, Satoyuki Tanaka, Kimihiro Taniguchi, Murat Ozdemir, Tinh Quoc Bui, Chikahisa Murakami, Daisuke Yanagihara: Buckling analysis of stiffened plate structures by an improved meshfree flat shell formulation, Thin-Walled Structures, 2017, accept.
  3. Nguyen MN, Bui QT, Truong TT, Tanaka S, Hirose S: Numerical analysis of 3-D solids and composite structures by an enhanced 8-node hexahedral element, Finite Elements in Analysis and Design, 2017, accept.
  4. Liu S, Yu TT, Bui QT, Yin S, Thai D, Tanaka S: A simple locking-free quasi-3D hyperbolic plate isogeometric formulation for the analysis of functionally graded plates, Composite Part B: Engineering, 2017, accept.
  5. Shota Sadamoto, Murat Ozdemir, Satoyuki Tanaka, Kimihiro Taniguchi, Tiantang Yu, Tinh Quoc Bui: Buckling analysis of tubular structure employing meshfree formulation based on convected coordinate system, Computational Mechanics, 2017, accept.
  6. Ken-ichiro Yoshida, Shota Sadamoto, Yu Setoyama, Satoyuki Tanaka, Tinh Quoc Bui, Chikahisa Murakami, Daisuke Yanagihara: Buckling analysis of plate structures employing meshfree Mindlin-Reissener plate formulation, Journal of Marine Science and Technology, 2017, accept.
  7. Hu X, Bui QT, Wang J, Yao W, LHT, Singh IV, Tanaka S: A new cohesive crack-tip symplectic analytical singular element involving plastic zone length for fatigue crack growth prediction under variable amplitude cyclic loading, European Journal of Mechanics - A/Solids, 2017, accept.
  8. Vu T, Nguyen N, Khosravifard A, Hematiyan MR, Tanaka S, Bui QT: A simple FSDT-based meshfree method for analysis of functionally graded plates, Engineering Analysis with Boundary Elements, 2017, accept.
  9. Shogo Sannomaru, Satoyuki Tanaka, Ken-ichiro Yoshida, Tinh Quoc Bui, Shigenobu Okazawa, Seiya Hagihara: Treatment of Dirichlet-type boundary conditions in the spline-based wavelet Galerkin method employing multiple point constraints, Applied Mathematical Modeling, Vol.43, pp.592-610, 2017.3.
  10. Kazuhisa Yagi, Satoyuki Tanaka, Takahiro Kawahara, Kanta Nihei, Hiroshi Okada, Naoki Osawa: Evaluation of crack propagation behaviors in a T-shaped tubular joint employing tetrahedral FE modeling, International Journal of Fatigue, Vol.96, pp.270-282, 2017.3.
  11. Satoyuki Tanaka, Hirotaka Suzuki, Shota Sadamoto, Shigenobu Okazawa, Tiantang Yu, Tinh Quoc Bui: Accurate evaluation of mixed-mode intensity factors of cracked shear-deformable plates by an enriched meshfree Galerkin formulation, Archive of Applied Mechanics, Vol.87, pp.279-298, 2017.2.
  12. Wang Z, Yu TT, Bui TQ, Tanaka S, Zhang C, Hirose S, Curiel-Sosa JL: Three-dimensional adaptive multiscale extended finite element method with displacement extrapolation for simulating straight and curved cracks, Computer Methods in Applied Mechanics and Engineering, Vol.313, pp.375-405, 2017.1.
  13. Okazawa S, Tsumori T, Yamashita T, Tanaka S: Finite element seismic response analysis of a reinforced concrete pier with a fractured finite tetrahedron mesh, Journal of Earthquake & Tsunami, Vol.10, p.1640013, 2016.12.
  14. Yin S, Yu T, Bui TQ, Zheng X, Tanaka S: In-plane material inhomogeneity of functionally graded plates: A higher-order shear deformation plate isogeometric analysis, Composite Part B: Engineering, Vol.106, pp.273-284, 2016.12.
  15. Satoyuki Tanaka, Hirotaka Suzuki, Shota Sadamoto, Shogo Sannomaru, Tiantang Yu, Tinh Quoc Bui: J-integral evaluation for 2D mixed-mode crack problems employing a meshfree stabilized conforming nodal integration method, Computational Mechanics, Vol.58, pp.185-198, 2016.8.
  16. Bui TQ, Do TV, Ton LHT, Doan DH, Tanaka S, Pham DT, Nguyen-Van T-A, Yu T, Hirose S: On the high temperature mechanical behaviors analysis of heated functionally graded plates using FEM and a new third-order shear deformation plate theory, Composite Part B (Engineering), Vol.92, pp.218-241, 2016.5.
  17. Yu T, Yin S, Bui TQ, Xia S, Tanaka S, Hirose S: NURBS-based isogeometric analysis of buckling and free vibration problems for laminated composites plates with complicated cutouts using a new simple FSDT theory and level set method, Thin-Walled Structures, Vol.101, pp.141-156, 2016.4.
  18. Yu T, Bui TQ, Yin S, Doan DH, Wu CT, Do TV, Tanaka S: On the thermal buckling analysis of functionally graded plates with internal defects using extended isogeometric analysis, Composite Structures, Vol.136, pp.684-695, 2016.2.
  19. Satoyuki Tanaka, Shogo Sannomaru, Michiya Imachi, Seiya Hagihara, Shigenobu Okazawa, Hiroshi Okada: Analysis of dynamic stress concentration problems employing spline-based wavelet Galerkin method, Engineering Analysis with Boundary Elements, Vol.58, pp.129-139, 2015.9.
  20. Satoyuki Tanaka, Hirotaka Suzuki, Shota Sadamoto, Michiya Imachi, Tinh Quoc Bui: Analysis of cracked shear deformable plates by an effective meshfree plate formulation, Engineering Fracture Mechanics, Vol.144, pp.142-157, 2015.8.
  21. Satoyuki Tanaka, Hirotaka Suzuki, Shuya Ueda, Shogo Sannomaru: An extended wavelet Galerkin method with a high-order B-spline for 2D crack problems, Acta Mechanica, Vol.226, pp.2159-2175, 2015.7.
  22. Pei Z., Iijima K., Fujikubo M., Tanaka S., Okazawa S., Yao T.: Simulation on progressive collapse behavior of whole ship model under extreme waves using idealized structure unit method, Marine Structures, Vol.39, pp.315-334, 2015.1.
  23. Satoyuki Tanaka, Takahiro Kawahara, Hiroshi Okada: Study on crack propagation simulation of surface crack in welded joint structure, Marine Structures, Vol.39, pp.315-334, 2014.12.
  24. Satoyuki Tanaka, Daisuke Yanagihara, Aya Yasuoka, Minoru Harada, Shigenobu Okazawa, Masahiko Fujikubo, Tetsuya Yao: Evaluation of ultimate strength of stiffened panels under longitudinal thrust, Marine Structures, Vol.36, pp.21-50, 2014.4.
  25. Shota Sadamoto, Satoyuki Tanaka, Shigenobu Okazawa: Elastic large deflection analysis of plates subjected uniaxial thrust using meshfree Mindlin-Reissner formulation, Computational Mechanics, Vol.52, pp.1313-1330, 2013.12.
  26. Satoyuki Tanaka, Hiroshi Okada, Shigenobu Okazawa, Yang Xi, Yasuaki Ohtsuki: Analysis of three-dimensional surface crack in welded joint structure using shell-solid mixed method, International Journal of Offshore and Polar Engineering, Vol.23, pp.224-231, 2013.9.
  27. Pei, Z., Iijima, K., Fujikubo, M., Tanaka, Y., Tanaka, S., Okazawa, S., Yao, T.: Collapse behaviour of ship hull girder of bulk carrier under alternative heavy loading condition, International Journal of Offshore and Polar Engineering, Vol.23, pp.232-239, 2013.9.
  28. Satoyuki Tanaka, Hiroshi Okada, Shigenobu Okazawa, Masahiko Fujikubo: Fracture Mechanics Analyses using the Wavelet Galerkin Method and extended Finite Element Method, International Journal for Numerical Methods in Engineering, Vol.93, pp.1082-1108, 2013.3.
  29. Satoyuki Tanaka, Hiroshi Okada, Shigenobu Okazawa: A wavelet Galerkin method employing B-spline bases for solid mechanics problems without the use of a fictitious domain, Computational Mechanics, Vol.50, pp.35-48, 2012.6.
  30. Satoyuki Tanaka, Shota Sadamoto, Shigenobu Okazawa: Nonlinear thin-plate bending analyses using Hermite reproducing kernel approximation, International Journal of Computational Methods, Vol.9, 1240012, 2012.3.
  31. Satoyuki Tanaka, Shota Sadamoto, Shigenobu Okazawa: Large deflection analysis for thin-plate using the Hermite Reproducing Kernel (HRK) approximation, Theoretical and Applied Mechanics Japan, Vol.60, pp.205-214, 2012.1.

受賞リスト

  • 田中智行: Phoenix Outstanding Researcher Award, 広島大学, 2017.11.
  • 井町美智也: 日本船舶海洋工学会奨学褒章, 2017.3.
  • 前田研吾, 井町美智也: 広島大学エクセレント・スチューデント・スカラシップ, 2017.1.
  • 鈴木啓峻: 自動車技術会「大学院研究奨励賞」, 2016.3.
  • 岡澤重信, 西口浩司, 田中智行: 日本計算工学会論文賞, 2015.5.
  • 上田秀哉: 自動車技術会「大学院研究奨励賞」, 2015.3.
  • 田中智行: The JACM Young Investigator Award(日本計算力学奨励賞), 2014.7.
  • 田中智行: 日本機械学会奨励賞, 2014.4.
  • 濱崎透: 日本船舶海洋工学会奨学褒章, 2013.3.
  • 田中智行: 日本船舶海洋工学会若手講演優秀賞, 2012.11.
  • 西口浩司, 小河優: 日本船舶海洋工学会奨学褒章, 2010.3.
  • 西口浩司: 日本船舶海洋工学会奨学褒章, 2008.3.
  • 田中智行: 日本船舶海洋工学会 ポスターセッション優秀賞, 2007.11.