主要論文リスト等

1. M.J. Dai, S. Tanaka, S. Sadamoto, T.T. Yu, T.Q. Bui, Advanced reproducing kernel meshfree modeling of cracked curved shells for mixed-mode stress resultant intensity factors, Engineering Fracture Mechanics, 2020, accepted.
2. M. Ozdemir, A. Kefal, M. Imachi, S. Tanaka, E. Oterkus, Dynamic fracture analysis of functionally graded materials using ordinary state-based peridynamics, Composite Structures, Vol.244, 112296, pp.1-36, 2020.7.
3. J. Gu, T.T. Yu, L. V. Lich, S. Tanaka, H. Yuan, T.Q. Bui, Crack growth adaptive XIGA simulation in isotropic and orthotropic materials, Computer Methods in Applied Mechanics and Engineering, Vol.365, 113016, pp.1-36, 2020.6.
4. R. Gadallah, S. Tsutsumi, S. Tanaka, N. Osawa, Accurate evaluation of fracture parameters for a surface-cracked tubular T-joint taking welding residual stress into account, Marine Structures, Vol.71, 102733, pp.1-20, 2020.5.
5. T.T. Yu, H. Yuan, J. Gu, S. Tanaka, T.Q. Bui, Error-controlled adaptive LR B-splines XIGA for assessment of fracture parameters in through-cracked Mindlin-Reissner plates, Engineering Fracture Mechanics, Vol.229, 106964, pp.1-22, 2020.4.
6. P.M. Kyaw, N. Osawa, R. Gadallah, S. Tanaka, Accurate and efficient method for analyzing mixed-mode SIFs for inclined surface cracks in semi-infinite bodies using numerical influence function method, Theoretical and Applied Fracture Mechanics, Vol.106, 102471, pp.1-13, 2020.4.
7. S. Sadamoto, M. Ozdemir, S. Tanaka, T.Q. Bui, S. Okazawa, Meshfree geometrical nonlinear analysis for flat, curved and folded shells including finite rotation, International Journal of Nonlinear Mechanics, Vol.119, 103300, pp.1-14, 2020.3.
8. M. Imachi, S. Tanaka, M. Ozdemir, T.Q. Bui, S. Oterkus, E. Oterkus, Dynamic crack arrest analysis by ordinary state-based peridynamics, International Journal of Fracture, Vol.221, pp.155-169, 2020.2.
9. J. Gu, T.T. Yu, L.V. Lich, S. Tanaka, L. Qiu, T.Q. Bui, Adaptive orthotropic XIGA for fracture analysis of composites, Composite Part B: Engineering, Vol.176, 107259, pp.1-21, 2019.11.
10. S. Tanaka, M.J. Dai, S. Sadamoto, T.T. Yu, T.Q. Bui, Stress resultant intensity factors evaluation of cracked folded structures employing 6DOF meshfree modeling, Thin-Walled Structures, Vol.144, 106285, pp.1-13, 2019.11.
11. S. Tanaka, S.H. Sujiatanti, Y. Setoyama, J. Yu, D. Yanagihara, Z. Pei, Buckling and collapse analysis of a cracked panel under a sequence of tensile to compressive load employing a shell-solid mixed finite element modeling, Engineering Failure Analysis, Vol.104, pp.987-1001, 2019.10.
12. H.D. Huynh, M.N. Nguyen, G. Cusatis, S. Tanaka, T.Q. Bui, Polygonal XFEM enhanced by Cartesian transformation for two-dimensional linear elastic fracture analysis, Engineering Fracture Mechanics, Vol.213, pp.241-263, 2019.5.
13. M. Imachi, S. Tanaka, T.Q. Bui, S. Oterkus, E. Oterkus, A computational approach based on ordinary state-based peridynamics with new transition bond for dynamic fracture analysis, Engineering Fracture Mechanics, Vol.206, pp.359-374, 2019.2.
14. M. Ozdemir, S. Sadamoto, S. Tanaka, S. Okazawa, T.T. Yu, T.Q. Bui, Application of 6-DOFs meshfree modeling to the linear buckling analysis of stiffened plates with curvilinear surfaces, Acta Mechanica, Vol.229, pp.4995-5012, 2018.12.
15. M. Ozdemir, S. Tanaka, S. Sadamoto, T.T. Yu, T.Q. Bui, Numerical buckling analysis for flat and cylindrical shells including through crack employing effective reproducing kernel meshfree modeling, Engineering Analysis with Boundary Elements, Vol.97, pp.55-66, 2018.12.
16. J. Gu, T.T. Yu, L.V. Lich, T.-T. Nguyen, S. Tanaka, T.Q. Bui, Multi-inclusions modeling by adaptive XIGA based on LR B-splines and multiple level sets, Finite Elements in Analysis and Design, Vol.148, pp.48-66, 2018.9.
17. R. Gadallah, N. Osawa, S. Tanaka, S. Tsutsumi, Influence of welding heat input and welding residual stress on fracture parameter and fatigue crack propagation of a bead-on-plate specimen, Engineering Failure Analysis, Vol.89, pp.200-221, 2018.7.
18. R. Gadallah, N. Osawa, S. Tanaka, S. Tsutsumi, A novel approach to evaluate mixed-mode SIFs for a through-thickness crack in a welding residual stress field using an effective welding simulation method, Engineering Fracture Mechanics, Vol.197, pp.48-65, 2018.6.
19. H. Wang, E. Oterkus, S. Oterkus, Three-dimensional peridynamic model for predicting fracture evolution during the lithiation process, Energies, Vol.11(6), pp.1-22, 2018.6.
20. M. Ozdemir, A. Ergin, D. Yanagihara, S. Tanaka, T. Yao, Semi-analytical methods to estimate ultimate strength of stiffened ship panels under longitudinal thrust, Marine Structures, Vol.59, pp.510-535, 2018.5.
21. H. Wang, E. Oterkus, S. Oterkus, Predicting fracture evolution during lithiation process using peridynamics, Engineering Fracture Mechanics, Vol.192, pp.176-191, 2018.4.
22. H. Wang, E. Oterkus, S. Oterkus, Peridynamic modelling of fracture in marine lithium-ion batteries, Ocean Engineering, Vol.151, pp.257-267, 2018.3.
23. G. Yi, T.T. Yu, T.Q. Bui, S. Tanaka, Bi-material V-notched SIFs analysis by X-FEM and conservative integral approach, Computers & Structures, Vol.196, pp.217-232, 2018.2.
24. M. Imachi, S. Tanaka, T.Q. Bui, Mixed-mode dynamic stress intensity factor evaluation employing ordinary state-based peridynamics theory, Theoretical and Applied Fracture Mechanics, Vol.93, pp.97-104, 2018.2.
25. K. Yoshida, S. Sadamoto, Y. Setoyama, S. Tanaka, T.Q. Bui, Chikahisa Murakami, Daisuke Yanagihara, Meshfree flat-shell formulation for evaluating linear buckling loads and mode shapes of structural plates, Journal of Marine Science and Technology, Vol.22, pp.501-512, 2017.9.
26. M.N. Nguyen, T.Q. Bui, T.T. Truong, S. Tanaka, Sohichi Hirose, Numerical analysis of 3-D solids and composite structures by an enhanced 8-node hexahedral element, Finite Elements in Analysis and Design, Vol.131, pp.1-16, 2017.9.
27. X. Hu, T.Q. Bui, J. Wang, W. Yao, L.H.T. Ton, I.V. Singh, S. Tanaka, A new cohesive crack-tip symplectic analytical singular element involving plastic zone length for fatigue crack growth prediction under variable amplitude cyclic loading, European Journal of Mechanics - A/Solids, Vol.65, pp.79-90, 2017.9.
28. S. Sadamoto, S. Tanaka, K. Taniguchi, M. Ozdemir, T.Q. Bui, Chikahisa Murakami, Daisuke Yanagihara, Buckling analysis of stiffened plate structures by an improved meshfree flat shell formulation, Thin-Walled Structures, Vol.117, pp.303-313, 2017.8.
29. R. Gadallah, N. Osawa, S. Tanaka, Evaluation of stress intensity factor for a surface cracked butt welded joint based on real welding residual stress, Ocean Engineering, Vol.138, pp.123-139, 2017.7.
30. S. Liu, T.T. Yu, T.Q. Bui, S. Yin, D.-K. Thai, S. Tanaka, A simple locking-free quasi-3D hyperbolic plate isogeometric formulation for the analysis of functionally graded plates, Composite Part B: Engineering, Vol.120, pp.182-196, 2017.7.
31. S. Sadamoto, M. Ozdemir, S. Tanaka, K. Taniguchi, T.T. Yu, T.Q. Bui, Buckling analysis of tubular structure employing meshfree formulation based on convected coordinate system, Computational Mechanics, Vol.59, pp.919-932, 2017.6.
32. T.-V. Vu, N.-H. Nguyen, A. Khosravifard, M.R. Hematiyan, S. Tanaka, T.Q. Bui: A simple FSDT-based meshfree method for analysis of functionally graded plates, Engineering Analysis with Boundary Elements, Vol.79, pp.1-12, 2017.6.
33. H. Wang, E. Oterkus, S. Celik, S. Toros, Thermomechanical analysis of porous solid oxide fuel cell by using peridynamics, AIMS Energy, Vol.5(4), pp.585-600, 2017.6.
34. K. Yagi, S. Tanaka, T. Kawahara, K. Nihei, H. Okada, N. Osawa: Evaluation of crack propagation behaviors in a T-shaped tubular joint employing tetrahedral FE modeling, International Journal of Fatigue, Vol.96, pp.270-282, 2017.3.
35. S. Sannomaru, S. Tanaka, K. Yoshida, T.Q. Bui, S. Okazawa, S. Hagihara: Treatment of Dirichlet-type boundary conditions in the spline-based wavelet Galerkin method employing multiple point constraints, Applied Mathematical Modeling, Vol.43, pp.592-610, 2017.3.
36. S. Tanaka, H. Suzuki, S. Sadamoto, S. Okazawa, T.T. Yu, T.Q. Bui: Accurate evaluation of mixed-mode intensity factors of cracked shear-deformable plates by an enriched meshfree Galerkin formulation, Archive of Applied Mechanics, Vol.87, pp.279-298, 2017.2.
37. Z. Wang, T.T. Yu, T.Q. Bui, S. Tanaka, C. Zhang, S. Hirose, J.L. Curiel-Sosa: Three-dimensional adaptive multiscale extended finite element method with displacement extrapolation for simulating straight and curved cracks, Computer Methods in Applied Mechanics and Engineering, Vol.313, pp.375-405, 2017.1.
38. S. Okazawa, T. Tsumori, T. Yamashita, S. Tanaka: Finite element seismic response analysis of a reinforced concrete pier with a fractured finite tetrahedron mesh, Journal of Earthquake & Tsunami, Vol.10, p.1640013, 2016.12.
39. S. Yin, T.T. Yu, T.Q. Bui, X. Zheng, S. Tanaka: In-plane material inhomogeneity of functionally graded plates: A higher-order shear deformation plate isogeometric analysis, Composite Part B: Engineering, Vol.106, pp.273-284, 2016.12.
40. S. Tanaka, H. Suzuki, S. Sadamoto, S. Sannomaru, T.T. Yu, T.Q. Bui: J-integral evaluation for 2D mixed-mode crack problems employing a meshfree stabilized conforming nodal integration method, Computational Mechanics, Vol.58, pp.185-198, 2016.8.
41. T.Q. Bui, T.V. Do, L.H.T. Ton, D.H. Doan, S. Tanaka, D.T. Pham, T.-A. Nguyen-Van, T. Yu, S. Hirose: On the high temperature mechanical behaviors analysis of heated functionally graded plates using FEM and a new third-order shear deformation plate theory, Composite Part B: Engineering, Vol.92, pp.218-241, 2016.5.
42. T.T. Yu, S. Yin, T.Q. Bui, S. Xia, S. Tanaka, S. Hirose: NURBS-based isogeometric analysis of buckling and free vibration problems for laminated composites plates with complicated cutouts using a new simple FSDT theory and level set method, Thin-Walled Structures, Vol.101, pp.141-156, 2016.4.
43. T.T. Yu, T.Q. Bui, S. Yin, D.H. Doan, C.T. Wu, T.V. Do, S. Tanaka: On the thermal buckling analysis of functionally graded plates with internal defects using extended isogeometric analysis, Composite Structures, Vol.136, pp.684-695, 2016.2.
44. S. Tanaka, S. Sannomaru, M. Imachi, S. Hagihara, S. Okazawa, H. Okada: Analysis of dynamic stress concentration problems employing spline-based wavelet Galerkin method, Engineering Analysis with Boundary Elements, Vol.58, pp.129-139, 2015.9.
45. S. Tanaka, H. Suzuki, S. Sadamoto, M. Imachi, T.Q. Bui: Analysis of cracked shear deformable plates by an effective meshfree plate formulation, Engineering Fracture Mechanics, Vol.144, pp.142-157, 2015.8.
46. S. Tanaka, H. Suzuki, S. Ueda, S. Sannomaru: An extended wavelet Galerkin method with a high-order B-spline for 2D crack problems, Acta Mechanica, Vol.226, pp.2159-2175, 2015.7.
47. Z. Pei, K. Iijima, M. Fujikubo, S. Tanaka, S. Okazawa, T. Yao: Simulation on progressive collapse behavior of whole ship model under extreme waves using idealized structure unit method, Marine Structures, Vol.39, pp.315-334, 2015.1.
48. S. Tanaka, T. Kawahara, H. Okada: Study on crack propagation simulation of surface crack in welded joint structure, Marine Structures, Vol.39, pp.315-334, 2014.12.
49. S. Tanaka, D. Yanagihara, A. Yasuoka, M. Harada, S. Okazawa, M. Fujikubo, T. Yao: Evaluation of ultimate strength of stiffened panels under longitudinal thrust, Marine Structures, Vol.36, pp.21-50, 2014.4.
50. S. Sadamoto, S. Tanaka, S. Okazawa: Elastic large deflection analysis of plates subjected uniaxial thrust using meshfree Mindlin-Reissner formulation, Computational Mechanics, Vol.52, pp.1313-1330, 2013.12.
51. S. Tanaka, H. Okada, S. Okazawa, Y. Xi, Y. Ohtsuki: Analysis of three-dimensional surface crack in welded joint structure using shell-solid mixed method, International Journal of Offshore and Polar Engineering, Vol.23, pp.224-231, 2013.9.
52. Z. Pei, K. Iijima, M. Fujikubo, Y. Tanaka, S. Tanaka, S. Okazawa, T. Yao: Collapse behaviour of ship hull girder of bulk carrier under alternative heavy loading condition, International Journal of Offshore and Polar Engineering, Vol.23, pp.232-239, 2013.9.
53. S. Tanaka, H. Okada, S. Okazawa, M. Fujikubo: Fracture Mechanics Analyses using the Wavelet Galerkin Method and extended Finite Element Method, International Journal for Numerical Methods in Engineering, Vol.93, pp.1082-1108, 2013.3.
54. S. Tanaka, H. Okada, S. Okazawa: A wavelet Galerkin method employing B-spline bases for solid mechanics problems without the use of a fictitious domain, Computational Mechanics, Vol.50, pp.35-48, 2012.6.
55. S. Tanaka, S. Sadamoto, S. Okazawa: Nonlinear thin-plate bending analyses using Hermite reproducing kernel approximation, International Journal of Computational Methods, Vol.9, 1240012, 2012.3.

受賞リスト